IP Decoder – QAM or 8VSB Decoder
Decoder that is capable of receiving off-air, clear QAM, and IP sources. It is capable of simultaneously outputting video in SDI, HDMI and component formats.
- General Details
The ND-24-IP is a low cost professional MPEG-2 and H.264 decoder that is capable of receiving content from off-air, clear QAM, and IP sources. The ND-24-IP is capable of simultaneously outputting video content in SDI, HDMI and component formats. SDI outputs are available in 3G-SDI, HD-SDI, or SD-SDI formats.
The unit can be used as a stand-alone high quality decoder, or used in conjunction with other IP encoders, to provide an end-to-end IP video delivery solution over a managed network.
When the ND-24-IP decoder is used with a PEG encoder (with Zixi option) and a Zixi Link License, it can provide a point-to-point reliable IP video transport from anywhere in the world with an internet connection. The ND-24-IP can also be used in a point-to-multipoint application, where the ND-24-IP would decode the IP based Zixi protocol stream from a Zixi Broadcaster.
FEATURES
- Simultaneous SDI/HDMI/Component HD + Composite SD Outputs
- Decoding content from Off-Air, Clear QAM, and IP sources
- Supports both MPEG-2 and H.264 content
- LCD screen
- Closed Captioning
- VBR or CBR
- IGMPv2 and IGMPv3
- IP Security Camera Decoding (VLC Compatible)
- Example Application
- Model Selection
- ND-24-IP
- Specifications
IP MODE
- Connectors: RJ-45
- Standard: 100/1000Base-T Ethernet
- UDP/RTP: Supported
- Protocols: IGMPv3/IGMPv2 Supported
STREAM PORTFOLIO
- SPTS and MPTS: Null Packet Deletion
- Bit Rate: Variable and Constant
8VSB MODE
- Connectors: 1x “F” Female
- Standard: ATSC Digital Television A/53E
- Tuning Range: UHF (Ch.14-69), VHF (Ch.2-13)
- Data Rate: 19.392 MHz
- Bandwidth: 6 MHz
- Power Level: -20 to +20 dBmV
- Impedance: 75 Ω
QAM MODE
- Connectors: 1x “F” Female
- Standard: ITU-T J.83; Annex A and B (64 & 256 QAM)
- Tuning Range: CATV Ch. 2-158 (STD, HRC, IRC)
- Data Range: 38.8 Mbps (QAM 256); 26.97 Mbps (QAM 64) – Auto Detect
- Bandwidth: 6 MHz
- Power Level: -15 to 20 dBmV (@ QAM 256), -20 to 20 dBmV (@ QAM 64)
- Impedance: 75 Ω
LOCAL
- Monitoring: Front-panel LCD screen
- Control: Front-panel Navigational Key-pad
REMOTE
- Monitoring/ Control: GUI-based menu via Web browser
(1x RJ45 rear-panel connector; 10/100Base-T)
IR input: 3.5 mm (future firmware release)
3G/HD/SD-SDI
- Connectors: 1x BNC
- Standards: SMPTE 424M (3G), SMPTE 292M (HD) & SMPTE 259M (SD)
- Video Resolution: 480i, 720p, 1080i, & 1080p
- Audio: Embedded PCM
- Connectors: 1x HDMI
- Video Resolution: 480i, 720p, 1080i, & 1080p
- Audio: Embedded PCM
COMPOSITE
- Connectors: 1x RCA for Video
- Video Resolution: 480i
- Audio: 2x RCA for Analog Audio (L,R)
COMPONENT
- Connectors: 3x RCA for Video (Y, Pb, Pr)
- Video Resolution: 480i, 720p, & 1080i
- Video Aspect Ratio: 4:3 & 16:9
- Audio: 2x RCA for Analog Audio (L,R)
DIGITAL AUDIO (SPDIF)
- Connectors: 1x RCA
MECHANICAL
- Dimensions: 8.69 x 8.0 x 1.97 inches
(220.7 x 203 x 50.0 mm) - Weight: 3.0 lbs (1.36 kg)
- Operating Temperature: 32 to 122 °F (0 to 50 °C)
- Storage Temperature: -13 to 158 °F (-25 to 70 °C)
- Operating Humidity: 0 to 95% RH @ 35 °C max, non-condensing
- Storage Humidity: 0 to 95% RH @ 35 °C max, non-condensing
POWER
- External Power Supply: 5 VDC @ 2.5 amp
- Order Inquiry
- Documents